AX Series

Tomy

We offer three high capacity general purpose centrifuges,
allowing for you to choose the best model for your spplication.

Switch to Japanese

Line UP

AXシリーズ

    • AX-521
    • AX-511
    • AX-501

Accessories here

[ECO] modo

[ECO] modo Electric power saving

Activating the power-saving [ECO] mode can also help reduce the power consumption during the waiting time (standby cooling) by allowing the temperature control bands to be changed.The chamber can cool down to the set temperature within approximately 3 minutes and a half (*) after release from ECO mode.

* Under the conditions: set temperature of 4℃ at an ambient temperature of 25℃.

 

Power consumption at ECO mode

An overall increase in cooling efficiency allows for drastic reduction in energy usage during normal operation.

  • Measurement conditions: Set to 4℃ at an ambient temperature of 25℃ while centrifugation is stopped.
    (Rotors in use: AX-521/AX-321: TS-37C+3750-TC06P)
  • The values shown above are average values obtained by measuring the units.

Flexibility

Spinning maximum 10,000rpm

All angle rotors can be spun maximum 10,000rpm

CA-16
50ml x 8
10,000rpm / 11,740G
Rotor for AX-521/511/501

Three-step acceleration and three-step and natural deceleration

Initial values for acceleration and deceleration characteristics are set from 0 to 500rpm, however, they can be varied up to maximum speed in 100rpm increments by function settings.

From micro tubes to 250ml bottles

The AX-521/511/501, with the ability to accommodate micro tubes to 250ml bottles or deep well plates, is ideal for wide range of applications. Using an optional bucket cap kit B433HS*, various types of rotors including swinging bucket rotors of biohazard-proof can be mounted.

Convenient flashing function

Convenient flashing function allows operation with preset centrifuging conditions.

*Bucket cap kit B433 is an optional kit.
HS This highly sealed rotor, which has been tested and certified by the Health Protection Agency (HPA, UK) to be compliant with the International Standard (Annex AA of the IEC 61010-2-020), meets requirements for biohazard safety. [Bucket cap kit B433] is an optional kit.

Compact Design

Compact design for minimum space requirement

コンパクト設計More compact in design, compared with existing high capacity refrigerated.centrifuge, is one of the many advantages of the AX series.
AX Series are ideally suited for applications where space is limited.

Easy to see and operate control panel

1.
Easy-to-see LCD monitor display shows various information including remaining run time, error messages, rotor types in use and records of centrifugal operation. The monitor can display in English or Japanese. (AX-521)

*Indication displays on the control panel in the photo is different from displays of actual operation.

2.
Dual color LED display allows the user to monitor the operation status just by looking the display; red indicates that the rotor is spinning while green indicates the rotor is stopped.

3.
Popular user-friendly Jog Dial equipped with an <ENTER> button on top enables setting to be changed quickly and more surely.

Safety & Ecology

Flap-drive system for safer and more efficient operation

Innovative Flap-drive system employed to maintain safe and efficient centrifugal operation allows a margin of error and eye-balancing of sample tubes.
*Some rotors are excepted.

  • Non-chlorine, ozone-friendly refrigeration medium which has zero ozone layer destruction coefficients is adopted.

One-push rotor locking knob

With a single knob push, the rotor can be quickly and securely fixed.
*Some rotors are excepted.

Flex-Spin Drive

The Flex-Spin Drive features a flexible motor shaft that equalizes minor imbalances without damaging the centrifuge or triggering the imbalance protection system. This allows excellent tolerance for minor differences in sample volumes.

Specifications

Model AX-521 AX-511 AX-501
Maximum Speed 10,000rpm
Maximum RCF 11,850G
Maximum Capacity 1,536ml (Deep-well plate x 8) 1,000ml (250ml x 4)
Control System Microprocessor control (feedback system)
Drive Motor Induction motor
Drive System Flex-Spin drive system (Direct drive with an automatic alignment function)
Data Entry Jog Dial equipped with an <ENTER> button
Temperature Setting Range From -9℃ to +35℃ (1℃ increment)
Speed Setting Range 100 to 10,000rpm (100rpm increments)
RCF Setting Range 10 to 11,850G (10G increments for the range less than 300G,
100G increments for the range over 300G)
Time Setting Range From 10 sec to 50 sec, in 10 sec increments, from 1 min to 99 min, in 1 min increments
or <F–> for free
Safety Devices • Imbalance detector, • Lid interlock, • Lid open/close detector, • Abnormal speed detector,
• Over-current circuit breaker, • Rotor identification system, • Motor over-current detector,
• Abnormally high or low chamber temperature detector
Additional Functions • Three-step acceleration characteristics selection, • Three memory function,
• Three-step deceleration characteristics selection, • FLASH (momentary spin) function,
• Memory function for last run parameters, • BART Code selection, • Power saving (ECO) mode
Refrigerant HFC R404A (270g) HFC R404A (260g) HFC R404A (250g)
Rated Current 120V : 12A, 220/230/240V : 6A 120V : 10A, 220/230/240V : 5A
Power Requirements 1-Phase 50/60Hz AC120V 15A, 1-Phase 50/60Hz AC220/230/240V 8A
Power Consumption(Heat output) 970W (834kcal/h) 960W (826kcal/h) 760W (654kcal/h)
Breaker Rated breaking current 120V : 15A, 220/230/240V : 7.5A
Protection Against Electric Shock Class I
Dimensions
(except protruding portion)
540W x 597D x 858H mm,
(table height; 750mm)
510W x 567D x 858H mm,
(table height; 750mm)
462W x 540D x 858H mm,
(table height; 750mm)
Net Weight 111kg (120V)
116kg (220/230/240V)
107kg (120V)
112kg (220/230/240V)
99kg (120V)
104kg (220/230/240V)
Environmental Requirements Ambient temperature range:10 to 35℃, Relative humidity:30 to 85%,
Atmospheric pressure:700 to 1,060hPa
Intended exclusively for use indoors, Overvoltage category: II, Pollution degree: 2
Accessories Included • Operator’s manual 1, • Warranty Card 1, • BART Cord table 1,
• Clear storage case for operator’s manual 1, • Attaching screw for clear storage case 1,
• Power cord×1pc., • Spanner 1, • Level gauge 1, • Rotor locking knob 1, • Drain plug 1

※Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.

 

 

Share this post