Cold Chamber

Jisico

J-CC1 J-CC2

1

● Microprocessor PID controller with digital setting and display.
● Fan motor installed circulating cool air ensures uniform temperature distribution in chamber.

Model

J-CC1

J-CC2

Environmental temp. range

5 ~ 30

Overall size(W×D×H)

mm

865×890×1,990

1,370×990×1,990

Chamber size(W×D×H)

mm

700×600×1,200

1,200×700×1,200

Capacity

504

1,008

Temperature

range

0.0 ~ 10.0

uniformity

±2 at 4

controller

PID controller

regulator

Relay type

Thermocouple

Pt 100 ohms

Circulation fan & motor

Ø100mm, 13W×2ea

Ø100mm, 13W×4ea

Refrigeration compressor

Hp

1/3

1/2

Insulation

Polystyrene foam

Observation window

Reinforced glass

Door

One door

Two door

Safety device

ELB, overheating protection system

Shelves

4ea

4ea×2

Material

interior

Stainless steel plate

exterior

Steel plate with powder coated finish

Power source & consumption

AC 220V 50/60Hz 1phase

AC 220V 50/60Hz 1phase

Shaking Incubator

Jisico

ES-20, Environmental Shaker-Incubator

es-20es-20-front

Description

The ES-20 is a compact bench–top Shaker–Incubator used for mixing of biological liquids as well as for incubation and cultivation of biological liquids according to the operator set program

Built–in microprocessor thermocontroller provides constant temperature control in  the incubator chamber. Forced heated air circulation inside the transparent plexiglas chamber guarantees even temperature distribution. Dismountable construction makes transportation easy.

Orbital shaking is controlled by the digital tachometer (rpm) and Digital time setting  regardless of the temperature. The unit is equipped with the direct–drive system ensuring most reliable stable long–time operation (up to 30 day nights).

The ES-20 is extremely easy to operate, with very straightforward setup of temperature, speed and time, using the two line set–up and status display, which clearly indicates both set and actual values for each of the three parameters.

Specification

Temperature setting range +25°C … + 42°C
Temperature control range 5°C above ambient … + 42°C
Setting resolution 0.1°C / 1 rpm
Temperature stability ±0.5°C
Speed control range 50–250 rpm
Orbit 10 mm
Display LCD, 2 x 16 signs
Digital time setting 1 min–96 hrs / non-stop
Plexiglas walls thickness 7 mm
Load capacity 2.5 kg
Overall dimensions 340x340x435 mm
Internal chamber dimensions 305×260×250 mm
Weight 13.2 kg
Nominal operating voltage 230 V, 50/60 Hz or 120 V, 50/60 Hz
Power consumption (230V / 120 V) 160 W (0.7 A) / 170 W (1.6 A)

ES-20/60, Environmental Shaker-Incubator

es-20-front

Description

Orbital Shaker–Incubator ES-20/60 for biotechnological and pharmaceutical laboratories is a professional category equipment designed for cultivation of microorganisms and eukaryotic cells including animal, plant and insect cells. Shaker is equipped with a direct-drive mechanism for platform motion. It provides reliable and stable operation for the long term experiments needed for cell growth. Shaker–Incubator ES-20/60 provides smooth or intensive mixing in flasks installed on the platform.

Built-in noiseless thermoresistant brushless fan provides precise temperature distribution inside the chamber (adjustable for up to +80°C). The inner chamber is made of stainless steel. State–of–the–art motor, newest thermal insulation materials, soft-start of the platform motion and temperature PID–control decrease the energy consumption and make the Shaker–Incubator highly energy efficient despite its relatively large size.

 

Speed control range 50–250 rpm (increment 10 rpm)
Temperature setting range +25°C… +80°C
Temperature control range 10°C above ambient… +80°C
Temperature setting resolution 0.1°C
Temperature stability ±0.5°C
Maximum load 8 kg
Orbit 20 mm
Digital time setting 1 min–96 hrs / non–stop (1 min increment)
Display LCD, 2 × 16 signs
Maximum continuous operation time 30 days
Overall dimensions 590 × 525 × 510 mm
Dimensions of the inner chamber 460 × 350 × 400 mm
Weight 41.1 kg
Nominal operating voltage 230 V, 50/60 Hz or 120 V, 50/60 Hz
Power consumption (230V / 120 V) 450 W (2 A) / 450 W (4.5 A)

BOD Incubator

JisicoJ-IBO1, J-IBO2, J-IBO3

1

● Microprocessor PID auto-tuning controller with digital setting and display.
● Special magnetic packing for temperature usage maintains top secrecy, and absorbs vibration so as not to affect contents inside a chamber.
● Over temperature limiter is installed to prevent overheating and protect specimen.

Model

J-IBO1

J-IBO2

J-IBO3

Type

Forced convection system

Environmental temp. range

5 ~ 30

Overall size (W×D×H)

mm

660×720×1,360

660×820×1,610

760×770×1,810

Chamber size (W×D×H)

mm

500×400×750

500×500×1,000

600×450×1,200

Capacity

150

250

324

Temperature

range

5 ~ 60

accuracy

±0.5 at 20.0

controller

PID controller

regulator

SSR type

Thermocouple

Pt 100 ohms

Heater (Ni-Cr)

W

600

800

1,000

Refrigeration compressor

Hp

1/4

1/4

1/3

Door

inner

Clear safety glass inner door

outer

Magnetic door closure with positive sealing gasket

Safety device

Self diagnosis function(Memory error, Temp. overheating,
SSR short circuit, Senser short circuit), ELB.

Shelves

3ea

Material

interior

Stainless steel plate

exterior

Steel plate with powder coated finish

Power source & consumption

AC 230V 50/60Hz 1phase

Net weight

kg

65

89

Certification

CE

Forced Convection Incubator

Jisico

J-100S-F, J-100M-F

1

● Microprocessor PID auto-tuning controller with digital setting and display.
● Overheating is prevented by automatic shut-off circuit.
● Fan motor installed circulating hot air ensures uniform temperature distribution in a chamber.

Model

J-100S-F

J-100M-F

Type

Forced convection system

Environmental temp. range

5 ~ 30

Overall size (W×D×H)

mm

580×600×820

730×650×870

Chamber size (W×D×H)

mm

450×450×450

600×500×500

Capacity

91

150

Temperature

range

Ambient+5.0 ~ 60.0

accuracy

±0.2 at 37.0

controller

PID controller

regulator

SSR type

Thermocouple

Pt 100 ohms

Heater

W

200

300

Safety device

Self diagnosis function(Memory error, Temp. overheating, SSR short circuit, Senser short circuit), ELB.

Shelves

3ea

Material

interior

Stainless steel plate

exterior

Steel plate with powder coated finish

Power source & consumption

AC 230V 50/60Hz 1phase

AC 230V 50/60Hz 1phase

Net weight

kg

47.5

61

Gravity Convection Incubator

Jisico

J-100S, J-100M

1

Microprocessor PID auto-tuning controller with digital setting and display.
● Overheating is prevented by automatic shut-off circuit.
● Air jacket system ensures uniform temperature distribution in a chamber, along with excellent heat insulation.

Model

J-100S

J-100M

Type

Gravity convection &  air jacket system

Environmental temp. range

5 ~ 30

Overall size (W×D×H)

mm

580×600×820

730×650×870

Chamber size (W×D×H)

mm

450×450×450

600×500×500

Capacity

91

150

Temperature

range

Ambient+5.0 ~ 60.0

accuracy

±0.5 at 37.0

controller

PID controller

regulator

SSR type

Thermocouple

Pt 100 ohms

Heater

W

200

300

Safety device

Self diagnosis function(Memory error, Temp. overheating,
SSR short circuit, Senser short circuit), ELB.

Shelves

3ea

3ea

Material

interior

Stainless steel plate

exterior

Steel plate with powder coated finish

Power source & consumption

AC 230V 50/60Hz 1phase

AC 230V 50/60Hz 1phase

Net weight

kg

47

60

Certifiction

CE

 

Gravity convection Incubator
Product :

Gravity convection Incubator

Model :  J-IECO
● Microprocessor PID auto-tuning controller with digital setting and display.

● Air jacket system ensures uniform temperature distribution in chamber, along with excellent thermal insulation.

● Double-door system and the inner door with tempered glass for heat loss prevention and convenient observation.

Gravity Connection Incubator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gravity convection incubator / Ogawa medium incubator
Product :

Gravity convection incubator / Ogawa medium incubator

Model :  J-NIB4
This incubator is designed for the Ogawa medium.

Air jacket system ensures uniform temperature distribution in chamber, along with excellent thermal insulation.

Microprocessor PID controller with digital setting and display.

Overheating is prevented by automatic shut-off circuit.

4 chambers are controlled individually by separate PID auto-tuning controller, and each chamber can operate at different conditions.

Double-door system and the inner door with tempered glass for heat loss prevention and convenient observation.

This incubator is used to the 16cm length of Ogawa medium.

 

jnib4