UV Cabinet

UV Cabinet

Biosan

UVC/T-AR, DNA/RNA UV-cleaner box

1

Description

DNA/RNA UV-cleaner box UVC/T-AR is designed for clean operations with DNA samples. UV-Cabinet provide protection against contamination.

Model is a bench-top type, made of metal framework, plexiglas walls and working surface painted with powder enamel or made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the cabinet during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

2

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (8,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV –cabinet during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material

Plexiglas: Polymethyl methacrylate ALTUGLAS EX

Working surface material

Steel with chemicals resistant powder coating

Open UV-lamp

1 x 25W built‑in bactericidal, TUV25WG13 UV-C

Radiation type

UV (λ = 253.7 nm), ozone-free

UV radiation level

15 mW / cm2 / sec

Digital time setting of direct UV exposure

0–24 hrs / non–stop (increment 1 min)

UV-recirculator

1x25W (efficiency >99% per 1 hour)

Daylight lamp (for working area illumination)

1 x TLD-15W

Thickness of side panels

4 mm

Thickness of upper front panel

8 mm

Thickness of screen

8 mm

Optical transmission

92%

UV protection

>99.90% Polymethyl methacrylate ALTUGLAS EX

Working area

650 × 475 mm

Safety features

Automatic open UV-lamp switch off when screen is open

Power outlets inside the unit

Inlet for power cords

Nominal operating voltage

100-240 V, 50/60Hz

Power consumption

67 W

Overall dimensions

690 × 535 × 555 mm

Weight (net / gross)

23 / 33 kg

Optional table

T-4 (800 × 600 × 750 mm)

UVC/T-M-AR, DNA/RNA UV-cleaner box

3

Description

DNA/RNA UV-cleaner box UVC/T-M-AR is designed for clean operations with DNA samples. UV-Cabinet provide protection against contamination.

Model is a bench-top type, made of metal framework, working surface painted with powder enamel or made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the cabinet during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (8,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV –cabinet during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material

Rear: stainless steel Sides and front: glass (EUROGLASS, Germany)

Working surface material

Stainless steel

Open UV-lamp

1 x 25W built‑in bactericidal, TUV25WG13 UV-C

UV radiation level

15 mW / cm2 / sec

Radiation type

UV (λ = 253.7 nm), ozone-free

Digital time setting of direct UV exposure

0–24 hrs / non–stop (increment 1 min)

UV-recirculator

1x25W (efficiency >99% per 1 hour)

Daylight lamp (for working area illumination)

1 x TLD-15W

Thickness of side panels

4 mm

Thickness of upper front panel

8 mm

Thickness of screen

4 mm

Optical transmission

95%

UV protection

>96%, UV-protection film

Working area

650 × 475 mm

Safety features

Automatic open UV-lamp switch off when screen is open

Power outlets inside the unit

Inlet for power cords or optional 1x Built-in socket

Nominal operating voltage

100-240 V, 50/60Hz

Power consumption

67 W

Overall dimensions

690 × 535 × 555 mm

Optional table

T-4 (800 × 600 × 750 mm)

Weight (net / gross)

31 / 39 kg

UVT-B-AR, DNA/RNA UV-cleaner box

4

Description

DNA/RNA UV-cleaner box UVT-B-AR is designed for clean operations with DNA samples. UV-Cabinet provide protection against contamination.

Model is a bench-top type, made of metal framework, working surface painted with powder enamel or made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the cabinet during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

5

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (8,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV –cabinet during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material

Rear: stainless steel, Sides: steel with chemical resistant powder coating Front: glass (EUROGLASS, Germany)

Working surface material

Stainless steel

Open UV-lamp

1 x 25W built‑in bactericidal, TUV25WG13 UV-C

UV radiation level

15 mW / cm2 / sec

Radiation type

UV (λ = 253.7 nm), ozone-free

Digital time setting of direct UV exposure

0–24 hrs / non–stop (increment 1 min)

UV-recirculator

1x25W (efficiency >99% per 1 hour)

Daylight lamp (for working area illumination)

1 x TLD-15W

Thickness of side panels

2 mm

Thickness of upper front panel

8 mm

Thickness of screen

4 mm

Optical transmission

95%

UV protection

>96%, UV-protection film

Working area

650 × 475 mm

Safety features

Automatic open UV-lamp switch off when screen is open

Power outlets inside the unit

1 Built-in socket, max. 1000 W or optional inlet for power cords

Nominal operating voltage

100-240 V, 50/60Hz

Power consumption

67 W

Overall dimensions

690 × 585 × 555 mm

Optional table

T-4 (800 × 600 × 750 mm)

Weight (net / gross)

32 / 42 kg

UVT-S-AR, DNA/RNA UV-cleaner box

6

Description

DNA/RNA UV-cleaner box UVT-S-AR is designed for clean operations with DNA samples. UV-Cabinet provide protection against contamination.

Model is a bench-top type, made of metal framework, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the cabinet during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

7

Specially assigned moving tables T-4L (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (8,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV –cabinet during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material

Rear: stainless steel Sides and front: glass (EUROGLASS, Germany)

Working surface material

Stainless steel

Open UV-lamp

2x30W built‑in bactericidal, TUV30WG13 UV-C

UV radiation level

15 mW / cm2 / sec

Radiation type

UV (λ = 253.7 nm), ozone-free

Digital time setting of direct UV exposure

0–24 hrs / non–stop (increment 1 min)

UV-recirculator

1 х 30W (efficiency >99% per 1 hour)

Daylight lamp (for working area illumination)

1 x TLD-30W

Thickness of side panels

4 mm

Thickness of upper front panel

8 mm

Thickness of screen

5 mm

Optical transmission

95%

UV protection

>96%, UV-protection film

Working area

1200 × 520 mm

Safety features

Automatic open UV-lamp switch off when screen is open

Power outlets inside the unit

3 Built-in sockets max. 1000 W

Nominal operating voltage

230 V, 50 Hz or 120 V, 60 Hz

Power consumption (230V / 120 V)

315 VA (1.4 A) / 530 VA (4.5 A)

Overall dimensions

1245 × 585 × 585 mm

Weight (net / gross)

58 / 68.5 kg

Optional table

T-4L (1290 × 600 × 770 mm)

Optional drawer unit

LF-1 (300 × 450 × 705 mm)


UVC/T-M-AR, DNA/RNA UV-cleaner box

Description

DNA/RNA UV-cleaner box UVC/T-M-AR is designed for clean operations with DNA samples. UV–cleaner box provide protection against contamination.

Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (9,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV –cleaner box during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material Rear: stainless steel Sides and front: glass (EUROGLASS, Germany)
Working surface material Stainless steel
Open UV-lamp 1 x 25W built‑in bactericidal, TUV25WG13 UV-C
UV radiation level 15 mW / cm2 / sec
Radiation type UV (λ = 253.7 nm), ozone-free
Digital time setting of direct UV exposure 1 min–24 hrs / non–stop (increment 1 min)
UV-recirculator 1x25W (efficiency >99% per 1 hour)
Daylight lamp (for working area illumination) 1 x TLD-15W
Thickness of side panels 4 mm
Thickness of upper front panel 8 mm
Thickness of screen 4 mm
Optical transmission 95%
UV protection >96%, UV-protection film
Working area 650 × 475 mm
Safety features Automatic open UV-lamp switch off when screen is open
Power outlets inside the unit Inlet for power cords or optional 1x Built-in socket, max. 1000 W (pls, order respectively)
Nominal operating voltage 100-240 V, 50/60Hz
Power consumption 67 W
Overall dimensions (W×D×H) 690 × 535 × 555 mm
Weight (net / gross) 28.8 / 39 kg
Optional table T-4 (800 × 600 × 750 mm)

UVT-B-AR, DNA/RNA UV-cleaner box

Description

DNA/RNA UV-cleaner box UVT-B-AR is designed for clean operations with DNA samples. UV-Cabinet provide protection against contamination.

Model is a bench-top type, made of metal framework, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the cabinet during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4 (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (9,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV–cabinet during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material Rear: stainless steel, Sides: steel with chemical resistant powder coating Front: glass (EUROGLASS, Germany)
Working surface material Stainless steel
Open UV-lamp 1 x 25W built‑in bactericidal, TUV25WG13 UV-C
UV radiation level 15 mW / cm2 / sec
Radiation type UV (λ = 253.7 nm), ozone-free
Digital time setting of direct UV exposure 1 min–24 hrs / non–stop (increment 1 min)
UV-recirculator 1x25W (efficiency >99% per 1 hour)
Daylight lamp (for working area illumination) 1 x TLD-15W
Thickness of side panels 2 mm
Thickness of upper front panel 8 mm
Thickness of screen 4 mm
Optical transmission 95%
UV protection >96%, UV-protection film
Working area 650 × 475 mm
Safety features Automatic open UV-lamp switch off when screen is open
Power outlets inside the unit Inlet for power cords or optional 1x Built-in socket, max. 1000 W (pls, order respectively)
Nominal operating voltage 100-240 V, 50/60Hz
Power consumption 67 W
Overall dimensions (W×D×H) 690 × 585 × 555 mm
Optional table T-4 (800 × 600 × 750 mm)
Weight (net / gross) 31.2 / 42 kg

UVT-S-AR, DNA/RNA UV-cleaner box

Description

DNA/RNA UV-cleaner box UVT-S-AR is designed for clean operations with DNA samples. UV-cleaner box provide protection against contamination.

Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel.

UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface.

UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons.

UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box.

Specially assigned moving tables T-4L (with wheel locks) with a drawer are available on request.

Advantages of Biosan UV-cleaner boxes:

  • Ozone free high density UV decontamination
  • Long living UV lamps (9,000 hours average)
  • Automatic switch off of UV-lamps when the protective screen is opened
  • Bactericidal flow-type recirculator providing permanent decontamination inside UV – cleaner box during operation
  • Shockproof glass walls
  • Low noise, low energy consumption
  • Tables for installation of UV-cleaner boxes
  • UV-cleaner boxes with the bactericidal UV cleaner–recirculator AR is the patented Biosan solution

Specification

Walls material Rear: stainless steel Sides and front: glass (EUROGLASS, Germany)
Working surface material Stainless steel
Open UV-lamp 2x30W built‑in bactericidal, TUV30WG13 UV-C
UV radiation level 15 mW / cm2 / s
Radiation type UV (λ = 253.7 nm), ozone-free
Digital time setting of direct UV exposure 1 min–24 hrs / non–stop (increment 1 min)
UV-recirculator 1 х 30W (efficiency >99% per 1 hour)
Daylight lamp (for working area illumination) 1 x TLD-30W
Thickness of side panels 4 mm
Thickness of upper front panel 8 mm
Thickness of screen 5 mm
Optical transmission 95%
UV protection >96%, UV-protection film
Working area 1200 × 520 mm
Safety features Automatic open UV-lamp switch off when screen is open
Power outlets inside the unit 3 Built-in sockets max. 1000 W
Nominal operating voltage 230 V, 50 Hz or 120 V, 60 Hz
Power consumption (230V / 120 V) 315 VA (1.4 A) / 530 VA (4.5 A)
Overall dimensions (W×D×H) 1245 × 585 × 585 mm
Weight (net / gross) 58 / 68.5 kg
Optional table T-4L (1290 × 600 × 770 mm)
Optional drawer unit LF-1 (300 × 450 × 705 mm)
Personal Vortex

Personal Vortex

BiosanV-1 plus, Personal Vortex for tubes

1

Description

Vortex V-1 plus is an ideal instrument for gentle mixing to vigorous resuspension of cells and biological and chemical liquid components in tubes using eccentric mechanism.

Vortex has two modes:

  1. Continuous operation;
  2. Impulse operation (activated by pressing the cap with the tube’s bottom).

 Specification

Eccentric mixing principle +
Speed control range 750-3000 RPM
Mixing module for tubes from 1.5 to 50 ml
Maximum mixing volume 30 ml
Orbit 4 mm
Overall dimensions 90x150x80 mm
Weight 0.8 kg
Input current/power consumption 12 V, 320 mA / 3.8 W
External power supply Input AC 100–240 V; 50/60 Hz; Output DC 12 V

Mini Low Temperature Freezer

Fryka-Small

EN 90//logg Chest Freezer

FRYKA chest freezers are the ideal solution for cooling and freezing for all laboratories, research and industry.
The compact, space-saving design, including a low-noise cooling unit, means the freezer can be used directly
in the laboratory work space. Equipped with a colour touch screen controller the cold box has various options
of supervision, failure analysis, temperature logger and remote maintenance.

Mini Low Temperature Freezer

Characteristics

Colour touch screen controller with representation of the temperature profile and user friendly menu structure

  • Integrated data logger readable over USB stick for temperature profile and alarm events
  • Battery-supplied alarm more than at least 72h with indication of the max. temperature reached at the interior
  • Ethernet interface // in case of an alarm E-Mail will be sent
  • Automatic and detailed supervision function of the refrigerating machine with failure analysis
  • Remote maintenance with a worldwide access over the Internet
  • Detailed user administration to protect the adjusted alarm- and temperature set points
  • Registered access control

Vacuum-Insulation: large interiorspace with small external dimensions and low power consumption Refrigeration unit: low noise, fully hermetically sealed, air-cooled, low maintenance All stainless steel casing

Interior free of fixtures: no ignition sources, makes cleaning easy Circulating air vent, so suitable for installation directly on walls Voltage-free alarm contact for connection to an external alarm system 100mV/K-output for connection to a temperature recording system Lockable lid

TT 85-90: two-stage cascade refrigeration system

Accesories :

  • TT 90-RC stainless steel shelf for max. 72 CryoBoxes
  • WiFi-Bridge to integrate the chest freezer in your wireless network

Option : 

  • Four fixed rollers, two with  brakes
  • Circulation fan inside (not with TT 85-90)
  • Bushing 19mm

TS //logg Freezer

FRYKA freezers have a usable space of 100 litres and can be used for cooling and freezing in industrial and
scientific laboratories. The 100 litre TS freezer is a classic stand alone unit.
Wether in laboratories or industry, due to the compact, space-saving design combined with a low noise
cooling unit, the TS 100 can be directly used in the workplace.

TS Logg

Characteristics:
• Colour touch screen controller with representation of the temperature profile and user friendly menu structure
– Integrated data logger readable over USB stick for temperature profile and alarm events
– Battery-supplied alarm more than at least 72h with indication of the max. temperature reached at the interior
– Ethernet interface // in case of an alarm event E-Mail will be sent
– Automatic and detailed supervision function of the refrigerating machine with failure analysis
– Remote maintenance with a worldwide access over the internet
– Detailed user administration to protect the adjusted alarm- and temperature set points
– Registered access control
• Vacuum-Insulation: large interior space with small external dimensions and low power consumption
• All stainless steel casing
• Refrigeration unit: low noise, fully hermetically sealed, air-cooled, low maintenance
• TS 80-100: two-stage cascade refrigeration system
• Foamed door with double door seal
• Side air vent, so suitable for installation directly on walls
• Voltage-free alarm contact for connection to an external alarm system
• 100mV/K-output for connection to a temperature recording system
• Lockable door
• With inlaid grilles and 4 shelf rails
Accessories:
• TS 100-RS stainless steel shelf
• Inlaid grilles
• WiFi-Bridge to integrate the freezer in your wireless network
Option:
• Four fixed rollers, two with brakes
• Circulation fan inside (not with TS 80-100)
• Bushing 19mm
• Electric door lock with access control and password

 B 35 //logg cold box

 

The B 35 //logg cold box is a small desktop applianca for cooling and freezing in all laboratories, research and industry. Due in particular to its compact space-saving design with a low-noise cooling unit, the cold box is suitable for direct use in the workplace.

Equipped with a colour touch screen controller the cold box has various options of supervision, failure analysis, temperature logger and remoteb35

Characteristics :

  • Colour touch screen controller with representation of the temperature profile and user friendly menu structure

– Integrated data logger readable over USB stick for temperature profile and alarm events

– Battery-supplied alarm more than at least 72h with indication of the max. temperature reached at the interior

– Ethernet interface // in case of an alarm E-Mail will be sent

– Automatic and detailed supervision function of the refrigerating machine with failure analysis

– Remote maintenance with a worldwide access over the Internet

– Detailed user administration to protect the adjusted alarm- and temperature set points

– Registered access control

  • Vacuum-Insulation: large interior space with small external dimensions and low power consumption
  • All stainless steel casing
  • Refrigeration unit: low noise, fully hermetically sealed, air-cooled, low maintenance
  • B 35-85: two-stage cascade refrigeration system
  • foamed door with double door seal
  • Interior free of fixtures
  • Side air vent, so suitable for installation directly on walls
  • Voltage-free alarm contact for connection to an external alarm system
  • 10OmV/K-output for connection to a temperature recording system
  • Lockable door
  • Stackable unit, max. 2 units

Accessories :

  • B 35-RS stainless steel shelf
  • WiFi-Bridge to integrate the cold box in your wireless network

Option :

  • Circulating air fan in the interior for better temperature distribution (not in B 35-85]
  • Bushing 10mm
  • Electric door lock with access control and password
  • Your desired option is not listed? Just ask us!
cytosmart

CytoSMART

Live Cell Imaging – Small, Easy and Affordable

  • Easy handling – Set-up of system within minutes
  • Small size – Easily fits in every incubator
  • Cloud technology – Monitor your cell culture anywhere and anytime
  • Low cost – The affordable live cell imaging tool for small budgets

Experience our new CytoSMART™ System  –  an easy-to-use and affordable live cell imaging system.Live Cell Imaging – The Smart Way

Cytosmart Lonza

The system consists of a mini-microscope, the CytoSMART™ Device (roughly the size of a cell culture plate), and an accompanying tablet which is linked to the device and can be fixed outside the incubator. With the CytoSMART™ Connect Cloud Service you can view your images and create time-lapse movies of your cell culture. As a cloud-based system, it enables you to access and download your cell culture data from any browser-capable system, whether it is your computer, laptop, smartphone or your personal tablet device. With the CytoSMART™ System your cells can remain in their defined conditions in the incubator, while you monitor the culture remotely online. Moreover, you can set automatic alerts – meaning you only need to physically tend to your cells once they have reached a certain confluency.

Applications for the CytoSMART™ System

With the CytoSMART™ System, both cell culture monitoring and the morphological read-out of a multitude of cell-based assays become routine tasks that can be performed without being physically present at the cell culture hood. The system also enables you to record images or time-lapse videos of your cell culture.

  • Migration assay, e.g. scratch assays – Automatic photo/video documentation
  • Stem cell culture documentation – Remote monitoring under hypoxic cell culture and GMP conditions or of iPSC reprogramming
  • Cell culture standardization – Automatic alerts for confluency, recording of cell growth curves and screening of culture media and growth factors
cb220

CB 220

Model CB 220

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 3 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact

Model 220

cb160

CB 160

Model CB 160

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 3 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact

Model 160

cb60

CB 60

Model CB 60

Important characteristics

  • Temperature range: room temperature plus 7 °C to 60 °C
  • Humidity range: up to 95% RH
  • Auto-sterilization with hot air at 180 °C
  • Double-pan humidification system with condensation protection
  • CO₂ gas-mixing jet with Venturi effect
  • Hot-air sterilizable CO₂ sensor with infrared technology
  • Humidity sensor with infrared technology
  • Display via color LCD monitor
  • Lockable door handle
  • Tightly-sealed inner door made of tempered safety glass
  • Seamless, deep-drawn inner stainless steel chamber
  • 2 perforated stainless steel shelves
  • Units are stackable with stacking adapter
  • Troubleshooting system with visual and audible alarms
  • Computer interface: Ethernet
  • Internal data recording and USB interface
  • Zero-voltage alarm contact

Model 60

Genecraft Labs

LUMINEX 200

The Luminex® 100/200™ System is a flexible analyzer based on the principles of flow cytometry.

Genecraft Labs

The system enables you to multiplex (simultaneously measure) up to 100 analytes in a single microplate well, using very small samples. The system delivers fast and cost-effective bioassay results on many assay formats including nucleic acid assays, receptor-ligand assays, immunoassays, and enzymatic assays

The Luminex 100/200 System is the combination of three core xMAP® Technologies. The first is xMAP microspheres, a family of fluorescently dyed micron-sized polystyrene microspheres that act as both the identifier and the solid surface to build the assay. The second is a flow cytometry-based instrument, the Luminex 100/200 analyzer, which integrates key xMAP detection components, such as lasers, optics, fluidics, and high-speed digital signal processors. The third component is the xPONENT® software, which is designed for protocol-based data acquisition with robust data regression analysis.

Product Specifications
Key Luminex 100/200 Features
Multiplexing Up to 100 analytes per sample (80 on MagPlex® microspheres)
Dynamic Range (Typical) ≥3.5 logs
Read Time 96-well plate in ≤ 45 min (up to 12,800 tests/hour)
Daily Start-Up/Shut-Down ≤ 30 min
Regulatory
Regulatory All Luminex instrumentation is marked in compliance with electrical/safety device standards for appropriate regions. For details on approvals and standards compliance please contact Luminex.
Aries

ARIES

ARIES® is Luminex’s sample to answer, real time PCR system that is crafted to increase laboratory efficiency, ensure result accuracy, and fit seamlessly into today’s lean laboratory. The ARIES® System is designed as an efficient and scalable solution that can run IVD assays. This will give your lab the flexibility needed to keep up with the needs of a modern molecular laboratory. ARIES® allows your lab to control each aspect of the sample to answer testing process, from sample accessioning through result reporting.

 

[youtube]https://youtu.be/D4dE6UmlJzw[/youtube]

 

Designed for Improved Lab Efficiency and Workflow

  • Universal Assay Protocol may enable multiple sample types and up to 12 different IVD assays to be run together in a Random Batch.
  • ARIES® software and user interface allows you to control every aspect of the sample to answer environment in your laboratory.
  • Two independent modules allow for simultaneous STAT and batch testing on a single ARIES® System.
  • Electronic reporting accelerates delivery of results.

 

Designed for Seamless Integration and Testing Accuracy

  • Internal barcode scanning matches samples to cassettes, enabling Position Independent Results no matter where each cassette is placed.
  • Integrated sample processing control ensures the assay run is successful from extraction through amplification.
  • Bidirectional LIS connectivity enables electronic ordering.*
  • Integrated touchscreen PC eliminates the need for computer peripherals, maximizing valuable bench space.

 

The Cassettes

The cassettes utilized in the ARIES® System are part of what help to create such an efficient and simple workflow. The cassette contains all of the reagents needed to run PCR testing on a sample. The extraction, purification, amplification, detection reagents, and Sample Processing Control (SPC) are all contained in the cassette. ARIES® cassettes are color coded and can be stored at room temperature, eliminating the need for freezing and thawing of reagents that take up freezer space and add time to preparation. For IVD samples, everything needed to run a sample is contained in the ARIES® cassette and the attached PCR tube.

Specifications
Physical Dimensions (Approximate) 38 cm x 61 cm x 100 cm (15.7” x 23.6” x 39.3”)
Weight 60 kgs (134 lbs)
Power Supply 120 volts (US) or 220 volts (EU)
Startup Time Less than 5 min
Hands-on Time Less than 2 min/sample†
Time to Result Less than 2 hours
Throughput 12 samples in less than 2 hours
48 results in 8 hours
Sample Input Volume 200-400 μL
Processing 2 Independent modules (1-6 samples/module); allows Random Batch and STAT testing
Data Input Handheld/internal bar scanning/manual
PC Integrated touchscreen
Operating System Microsoft Windows Embedded 7
Consumables ARIES® assay cassettes
Ancillary Equipment (optional) Barcode scanner stand; Printer for ARIES® instrument
Heat Source Peltier
Heat Output (BTU) 2730
Operating Temperature 59° F to 95° F (15° C to 35° C)
Temperature Control 55° C to 95° C (131° F to 203° F) within +/- 0.5° C
Connectivity Network and 5 x USB Type-A Ports
Network Settings Integrates bidirectionally with LIS either through HL7 or CSV file formats
Detector Photodiode

 

Optical Channels
Channels 1 2 3 4 5 6
Ex/Em 390/475 464/517 525/556 557/588 594/624 630/690
magpix

MAGPIX

Experience the power of MAGPIX® and perform up to 50 tests in a single reaction volume.

The MAGPIX system features an innovative design based on CCD imaging technology that allows for a more compact, robust system. It’s also easy to operate and maintain with streamlined start-up and shutdown protocols and minimal maintenance requirements. And MAGPIX is supported by a broad menu of commercially available assay kits, as well as reagents to build your own assays.

[youtube]https://youtu.be/uZ3ZPWn9gp4[/youtube]

 

Key MAGPIX Features

  • Multiplexing: Up to 50 analytes per sample
  • Sensitivity: Approximately 106 copies of DNA or single-digit picogram levels of protein
  • Dynamic Range (Typical): ≥ 3.5 logs
  • Read Time: 96-well plate in ≤ 60 min (up to 4,800 tests/hour)
  • Daily Start-Up/Shut-Down: ≤ 15 min
  • Foot Print: three ft linear bench space

Let MAGPIX empower your research with:

  • Affordability: Benefit from an affordable multiplexing solution that costs up to 4X less than comparable ELISA assays.*
  • Versatility: Transition to multiplexing at your own pace and exponentially grow your data.
  • Flexibility: Achieve a wider array of goals with the ability to analyze both proteins and nucleic acids.
  • Compact size: Reduce clutter with a compact instrument requiring less linear bench space.
  • Efficiency: Measure up to 50 targets in a single reaction volume and dramatically reduce sample input.
  • Assay support: Leverage a broad array of commercially available kits as well as reagents for user-developed assays.
Product Specifications
Performance
Multiplexing Capability Up to 50 individual analytes
Reagent Compatibility MagPlex® magnetic microspheres
Dynamic Range (Typical) ≥ 3.5 logs
Microplate Type 96-well plate
Reading Speed 96 wells ≤ 60 mins
Sample Temperature Control 35° – 60° C (95° – 131° F)
Sample Volume Uptake 20 – 200 μL
Probe Piercing Yes
Auto Adjust-Probe Height Yes
Daily Start-Up ≤ 15 minutes
Optics
Detection CCD Imager
Reporter Channel Excitation 511 nm
Classification Channel Excitation 621 nm
Physical Characteristics
Power 110 – 120 VAC or 200 – 240 VAC and 50 – 60 Hz
Dimensions 16.5 cm W x 60 cm D x 43 cm H (6.5″ W x 23.5″ D x 17″ H)
Weight 17.5 kg (38.5 lbs)
Regulatory
Regulatory All Luminex instrumentation is marked in compliance with electrical/safety device standards for appropriate regions. For details on approvals and standards compliance please contact Luminex.